Brekeke Documents

Find user guides, developer guides, API references, tutorials, and more!

Interoperability

  1. SIP Phones
    1. How to set paging function on the phone side
    2. SIP softphone we recommend
    3. Hard Phones
      1. ClearOne MAX IP Conferencing Phone
      2. Grandstream Networks Budge Tone - 100 Phone
      3. inter-tel
      4. ipDialog SIP Tone III Phone
      5. ipDialog SipTone™ V Phone
      6. Linksys IP Phone
      7. Nokia Phone
      8. Panasonic KX-TGP550 T04 DECT
      9. Panasonic KX-UT1xx
      10. Polycom Kirk DECT
      11. Polycom SoundPoint IP 650/330 Phone
      12. Polycom SpectraLink 8020 Wireless Telephone
      13. Polycom VVX600 Business Media Phone
      14. Polycom VVX Intercom feature
      15. SpectraLink 8400 Wireless Telephone
      16. SAXA IP Netphone SX Phone
      17. Snom m3 VoIP wireless DECT phone
      18. Snom Phones
      19. Swissvoice IP10S Phone
      20. Ubiquiti UniFi VoIP Phones
      21. Vtech Business Phones
      22. Yealink SIP Phones
      23. ZyXEL Prestige 200w
    4. Soft Phones
  2. VoIP SIP Gateways
  3. ITSP
  4. WebRTC client
  5. Nurse Call System
  6. Misc

Connecting with ClearOne MAX IP Conferencing Phone

This document explains how to use Brekeke SIP Server with ClearOne MAX IP Conferencing Phone. The ClearOne MAX IP Conferencing Phone is a standards-based IP phone that is one of the leading suppliers of innovative telecommunication solutions. It offers know-how and comprehensive technical competence in the field of analogue, digital and IP telephony, The ClearOne MAX IP Conferencing Phone offers exclusive devices that provide attractive design and user-friendly menu guidance. For more information on this product, please go to http://www.clearone.com/

 

Start ClearOne MAX IP Conferencing Phone

Set up your ClearOne MAX IP Conferencing Phone, with a fixed IP address (Ex: 192.168.0.155) and subnet mask of 255.255.255.0.

Please refer to the link below to set the IP address and the user settings manually. http://www.clearone.com/uploads/resource/800-158-302_Rev4.2_MAXIP_AdminGuide.pdf

Configure ClearOne MAX IP Conferencing Phone

Access ClearOne MAX IP Conferencing Phone webpage through the assigned fixed ip address (for example, http://192.168.0.155/ ).

  1. Enter User name: admin (default)
  2. Enter Password: clearone (default)
  3. Click on [OK] button
Set Phone Number

Assign the phone number for ClearOne MAX IP Conferencing Phone,
please complete the following steps:

  1. Go to CONFIGURATION > General Settings > Phone Numbers
  2. Enter the “Local phone number”: 7005(ex)
  3. Click on [Apply] button.
Configure for Brekeke SIP Server

The ClearOne MAX IP Conferencing Phone will be registered to Brekeke SIP Server once you enter the Brekeke SIP Server IP in Proxy server IP address/URL. Please complete the following steps:

 

  1. Go to CONFIGURATION > SIP parameters
  2. Set Authentication. if you do not use Authentication on Brekeke SIP Server, you may skip the step.
    Check the “Enable Authentication”, if you intend to set Authentication.

    • Authorization user: 7005(ex)
    • Authorization Password: XXXX(ex)
  3. Check the “Enable SIP Proxy registration:
    • Proxy server IP address/URL: 192.168.0.68(example Address of SIP Server)
    • Proxy port: 5060(ex)
  4. Select SIP Transport
    • UDP; Listen port: 5060(ex)
  5. Click [Apply] button.
  6. Reboot the phone to make settings in use
Brekeke SIP Server’s Registration Page

Click the [Registered Clients] tab of Brekeke SIP Server Admin tool


ClearOne MAX IP Conferencing Phone is registered with Brekeke SIP Server.

Known Issues

Since there is a limitation in the ClearOne MAX IP Conferencing Phone firmware that does not allow the ‘*’ key to be the first character sent, the call pickup function on Brekeke PBX will not be applied.

Yes No
« Hard PhonesGrandstream Networks Budge Tone - 100 Phone »
Suggest Edit