Interoperability

Connecting with IConnectHere

iConnectHere (http://www.iConnectHere.com) is the consumer division of deltathree, Inc. Deltathree is a leading provider of high-quality internet telephony products and services worldwide. This document will explain how to utilize Brekeke PBX with iConnectHere Service.

 

Setting Up An iConnectHere Account

Please Obtain an account from iConnectHere Website. ( http://www.iConnectHere.com )

iConnectHere Telephone Number Server Name User ID / Number Password
1555####### Sipauth.deltathree.com 1234 XXXX
ARS Configuration for iConnectHere

To define ARS Settings for your iConnectHere Account.

  • Brekeke PBX v3.1Click iConnectHere from  [ARS] menu in Brekeke PBX Admintool, then click on [New Route] button and set[Route Name] 1555####### or any other name
    [Password] XXXX
    [Account User ID] 1234
    [Forward Extension Number]4012(ex)
    [PSTN Number/DID Number] 1555#######
    [User Class] Brekeke PBX user extensions whose class setting is the same class as that set in this field can make outbound calls through this ARS route
  • Brekeke PBX v3.0 and earlierOpen iConnectHere at [ARS] Menu > [Settings] in the PBX Admintool. Once the page displays, Click on
    “Edit Variables” and enter the information for each variable.

    1. Enter the User ID that you received from the ITSP provider for the “v1” : 1234 (Example).
    2. Enter the password for the” v2″ : XXXX (Example).
    3. Enter the PBX extension number for receiving incoming calls “v3” :4012 (Example).
    4. DID Number in “v5” :1555####### (Example)
    5. Click on [Save and Update] button.
    6. Go back to route template page,Uncheck [Disabled] button in General Settings.
    7. Click on [Save and update] button.
Dial plans

add dial plan as below to work with iConnectHere and put the dial plan on top of other dial plans
and click [Apply Rules] button after adding the dial plan.

----------------------
[Matching Patterns]
$request = ^INVITE
$regaddr = (.+):15060
$localhost("%1") = ^true
To = sip:1555#######@

[Deploy Patterns]
$target = localhost:15060
$auth = false
$b2bua = true
$transport = udp
&net.sip.fixed.addrport.uas = true
------------------------
How to Make Calls
  • Incoming call: Calling from PSTN phone number in the US to Brekeke PBX extension 1001.
    Dial as: 1555###### (DID number must begins with 1)
  • Outgoing Call: Calling from Brekeke PBX extension to a PSTN number in the US.
    Dial as: 9 + 001 + area code + landline number
    (Here: 9 is the prefix you defined at Brekeke PBX ARS.)
Yes No
Suggest Edit