Set up SIP-UA
To have proper communications using the Brekeke SIP Server, precise settings at both Brekeke SIP Server and SIP client are necessary.
Setup Brekeke SIP Server
Generally, you may not need any settings at Brekeke SIP Server for basic setup. If you require the user authentication, please enable the Authentication feature and create users at the Brekeke SIP Server.
1. Enable the Authentication.
In the [Configuration] page > [SIP], set [Authentication] as follows.
|REGISTER||on||Authenticates REGISTER requests.|
|INVITE||on||Authenticates INVITE requests.|
2. Create Users.
In the [User Authentication] page > [New User], create a new user for authentication. Please refer to the section “User Authentication. New User / Edit User” for more details.
SIP Client (SIP-UA) Setup
Setting up the SIP client (User Agent, UA) begins with preparing an appropriate SIP client to meet your requirements and environment. Commonly used SIP clients are SIP softphones, SIP hard phones, VoIP Gateways, Analog Telephone Adaptor (ATA), and Instant Messenger (IM).
1. Basic settings for SIP clients.
The setting items are depending on SIP clients.
|SIP Proxy Server||Brekeke SIP Server’s IP address or FQDN|
|Registrar||Brekeke SIP Server’s IP address or FQDN|
|Outbound Proxy||Brekeke SIP Server’s IP address or FQDN|
|Domain||Brekeke SIP Server’s IP address or FQDN|
|Realm||Brekeke SIP Server’s IP address
*Set the same Realm which is set to the SIP Server if the server does authentication.
|User Name||User name.|
|Authentication User Name||When authentication is set at the Brekeke SIP Server, set the user name that is assigned by server.|
|Password||When authentication is set at the Brekeke SIP Server, set the password that is assigned by server.|
*For more information, refer to vendor’s SIP-UA Manual.
2. Check Registered Client
If a SIP client is properly set, you can confirm registration status from the [Registered Clients] page on the Brekeke SIP Server Admintool.
Make a test call
After more than two SIP clients are registered in the Brekeke SIP Server, SIP clients can call each other by dialing a registered user name.