Brekeke SIP Server Wiki

Set Up IPv6 on Brekeke SIP Server Version 3

Setup at Brekeke SIP Server version 3
  1. Enable IPv6 from Brekeke SIP Server machine
  2. From Brekeke SIP Server admintool > [Configuration] > [System]->[IPv6],
    [IPv6]: on
  3. For Windows XP or Linux server machine,
    manually input Brekeke SIP Server machine IPv6 IP in field
    Brekeke SIP Server admintool > [Configuration] > [System]->[Network] ->[Interface address x]
    Such as, 2001::1234
  4. Restart Brekeke SIP server from admintool
    the Brekeke server machine IPv6 IP will show from page
    Brekeke SIP Server admintool >[Start/Shutdown]
Setup at Client

Here we use Bria softphone as an example for registering to Brekeke SIP Server with IPv6

  1. Enable IPv6 at machine where Bria softphone is installed
  2. Download Bria 3.3 from http://www.counterpath.com
  3. From phone interface, click softphone/Account settings/Add, and add a new SIP account
  4. At Account tab,
    User ID: phone SIP ID, such as, 100
    Domain: [Brekeke_SIP_Server_IPv6_IP], enclose Brekeke Server IPv6 IP with square brackets;
    such as, [2001::1234]
    password: authentication password the same as that set at Brekeke SIP Server [User Authentication] page
    Display Name: any
    Authorization name: authentication ID the same as that set at Brekeke SIP Server [User Authentication] page
    select “Register with domain and receive calls” check box
  5. At Transport tab, check “enable IPv6
  6. click OK button

Bria registration record with IPv6 IP will show from page
Brekeke SIP Server admintool > [Registered Clients]

Yes No
Suggest Edit