Interoperability

The following configuration is to enable shared line at Panasonic KX-UT1xx phones when using Brekeke PBX shared call appearance(SCA) feature.

Configure Brekeke products

1. For Brekeke SIP Server:

• If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as ON
  please create authentication account from [Brekeke SIP Server] > [User Authentication]>[New User], such as
  User: line-100
  password: 1234
  Confirm Password: 1234

• If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as OFF,
  no additional setup is needed

2. For Brekeke PBX:

• Check the above setup in “For Brekeke SIP Server” about settings at PBX bundled SIP Server
• Create user 100 from [Brekeke PBX]>[Users]>[New User]

---

Configure Panasonic KX-UT1xx

[VoIP] > [SIP Settings] >[Line 2]:

set up phone SIP ID and Brekeke products IP address which phone will register to.

[Phone Number]:
Phone Number: line-, e.g. line-100, 100 is the pbx user set above
SIP URI: line-, e.g. line-100
[SIP Server]:
Registrar Server Address: IP address of Brekeke SIP server or Brekeke PBX
Proxy Server Address: IP address of Brekeke SIP server or Brekeke PBX
Presence Server Address: IP address of Brekeke SIP server or Brekeke PBX
[SIP Authentication]:
Authentication ID: user authentication ID, e.g. line-100 as set above in Brekeke products
Authentication Password: authentication password, e.g. 1234 as set above in Brekeke products

[VoIP] > [VoIP Settings] > [Line 2]:

Set up DTMF and Codecs

[Telephone] > [Call Control] > [Line 2]:

[Call Control]:
Display Name: e.g. line-100
Enable Shared Call: Yes

The phone registration record will show in Brekeke SIP server or Brekeke PBX bundled SIP server admintool > [Registered Clients] page, with above setting, the phone will register with SIP ID line-100.

Related link about SCA:

• Brekeke PBX SCA setup