Panasonic KX-TGP550 T04
The Panasonic KX-TGP550 has a TGP550 corded handset base unit and 1 cordless handset TPA50. Base unit supports up to 6 DECT handsets.
This document explains how to use Brekeke products with Panasonic KX-TGP550 and setup about Panasonic KX-TGP550 SCA feature.
For more informaiton about Panasonic KX-TGP550, please check http://panasonic.net
Configure Brekeke products
1. For Brekeke SIP Server:
- If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as ON
please create authentication account from [Brekeke SIP Server] > [User Authentication]>[New User], such as
User: 100
password: 1234
Confirm Password: 1234
- If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as OFF,
no additional setup is needed
2. For Brekeke PBX:
- Check the above setup in “For Brekeke SIP Server” about settings at PBX bundled SIP Server
- Create user 100 from [Brekeke PBX]>[Users]>[New User]
Configure Panasonic KX-TGP550 T04
From details about Panasonic KX-TGP550 T04, please check Panasonic KX-TGP550 T04 manual.
Log in phone user interface by default username and password: admin / adminpass
If needed, change phone IP address from Network menu.
[VoIP] > [SIP Settings] >[Line 1]:
set up phone SIP ID and Brekeke products IP address which phone will register to.
[Phone Number]:
Phone Number: Phone SIP ID, e.g. 100 as set above in Brekeke products
Line ID: line ID, e.g. 100
[SIP Server]:
Registrar Server Address: IP address of Brekeke SIP server or Brekeke PBX
Proxy Server Address: IP address of Brekeke SIP server or Brekeke PBX
Presence Server Address: IP address of Brekeke SIP server or Brekeke PBX
[SIP Authentication]:
Authentication ID: user authentication ID, e.g. 100 as set above in Brekeke products
Authentication Password: authentication password, e.g. 1234 as set above in Brekeke products
[VoIP] > [VoIP Settings] >[Line 1]:
Set up DTMF and Codecs
[Telephone] > [Call Control] > [Line 1]:
Set up display name, voice mail access number, call feature and call forward
[Call Control]:
Display Name: caller ID, e.g. 100 as set above in Brekeke products
Voice Mail Access Number: 8 voicemail access number defined in Brekeke PBX
Save above setting and Panasonic KX-TGP550 T04 will register at Brekeke products.
The phone registered record will show in Brekeke SIP server or Brekeke PBX bundled SIP server admintool > [Registered Clients] page, with above setting, the phone will register with SIP ID 100.
Configure shared line in Panasonic KX-TGP550 T04
The following configuration is to enable shared line at Panasonic KX-TGP550 when using Brekeke PBX shared call appearance(SCA) feature.
Set up Panasonic KX-TGP550 T04 as in “Configure Panasonic KX-TGP550 T04”, and set up more fields as below
[Telephone] > [Call Control] > [Line 1]:
[Call Control]:
Enable Shared Call: Yes
Unique ID of Shared Call: line-<pbx_user_id>, e.g. line-100; here 100 is the Brekeke PBX user ID for this phone as set in above section “Configure Brekeke products”