SpectraLink 8400 Wireless Telephone
Please follow the instruction in the following link to set up and activate WiFi from phone
and then set a static IP address to the phone, such as, 192.168.200.100
Once SpectraLink 8400 has connected to WiFi successfully, you can access phone webpage from web browser (http://192.168.200.100)
Default password is 456.
SIP Configuration
From “Settings”/”Lines”, selet a line.
Use the following steps to complete the configuration:
Identification:
Address: 4012(ex)
Label: 4012(ex)
Type: Private
Num Line Keys: 4(ex)
Calls Per Line: 1 (ex)
Authentication:
Use Login Credentials: Disable
User ID: 4012(ex)
Password: XXXX
Server 1:
Special Interop: Standard
Address: Brekeke server IP e.g.192.168.200.68
Port: 5060
Transport: UDPonly
Message Center:
Subscription Address: the same as Identificaiton Address, 4012(ex)
Callback Mode: Contact
Callback Contact: 8
If TCP/TLS is used as phone SIP transport,
from “Settings”/”Network”, enable tcp/tls transport
When using TLS transport, upload certificate from “Settings”/”Network”
and set port 5061 from phone line “Server 1” page
From “Settings”/”Network”, you can also edit WiFi setup.
From “Settings”/”Audio Codec Priority”, add proper codecs to “In use” side.